Votronic 3084 akumulatora aizsargs 300

The Votronic 3084 Battery Protector 300 is currently the strongest battery monitor in Votronic's range and is supplied with a control relay.

• Max. switching current: 300 A, 600 A for 20 ms
• Complies with DIN EN 1789 and the strict requirements of DIN EN 13976
• Includes separate control unit

The Battery Protector 300 from Votronic (MPN 3084) is a fully automatic battery protection for motorhomes and boats as well as fire, rescue and emergency vehicles, which can also be used as a powerful switching module. The Battery Protector 300 consists of a high-current relay designed for switching currents up to 300 A (continuous, 600 A for 20 ms) and a separate control unit. As battery protection, it protects the battery from dangerous deep discharge and the consumers from both under- and overvoltage.

It is connected between the onboard battery and the consumer and is suitable for all classic lead battery types as well as modern lithium LiFePO4 batteries. With its extremely low current consumption of less than 3 mA, it meets the strict requirements of DIN EN 13976.

Key product features of the Battery Protector 300, 3084

• Suitable for 12 V and 24 V DC operating voltage
• Low current consumption, only 3 mA self-consumption
• Test mark: E-test, (EMC/vehicle directive)
• Additional warning by acoustic signals
• 300 A maximum switching current, 600 A for short-term peak currents

Works with all lead batteries and modern lithium LiFePO4 batteries. From an external, 1-pole switch, the device can also be used as a remote-controlled battery main switch (Switch Unit 300).

• Switchable on and off at the push of a button

Can be switched on again at any time thanks to the emergency-on function

Can alternatively be used as a remote-controlled power relay (Switch Unit), e.g. on the LCD Battery Computer S.

The Battery Protector 300 has an emergency-on function, via which the device can be switched on again at any time in an emergency. This function can also be remote-controlled via a switch. The device is equally suitable for 12 V and 24 V battery systems and has the same selectable automatic or fixed switching thresholds as the Battery Protector 100. It also has an optical and acoustic pre-alarm, a separate warning switching output and two LEDs on the housing that indicate the operating status of the device.

Scope of delivery Votronic 3084 Battery Protector 300

• 1x control electronics
• 1x bistable relay, 300 A
• 1x sheathed cable 3 x 0.75 mm²
• 1x 1 m communication cable
• 1x operating instructions